甲子園電腦教育中心 - Cisco CCNP 2010 證書課程

課程簡介

Cisco CCNP 是一張高級網絡專家認可證書，亦是全球公認的專業認可資格。這張證書主要目的是讓網絡工程師能在現今變化迅速的資訊網絡環境中，都能掌握和擁有最先進的網絡技術，任何時候都能保持領導地位。

擁有CCNP 國際認證證明您在區域或廣域網路(超過500節點以上) 熟悉網路系統安裝、建置及故障排除能力。也代表您能以高超熟練的技巧在網路核心管理路由器與網路交換器以及整合語音、無線網路與網路安全。

考取 CCNP 認證的條件亦相對比 CCNA 高。首先要成功考取 CCNA，然後就再通過三個不同範疇科目的專業考試，包括: SWTICH、ROUTE 以及 TSHOOT。

課程中你將會學到 Cisco Router 和 Switch 的高層次的指令運用和設定，全班會分成多個小組進行一系列實習，利用不同設備建立成多個網絡，然後互相連接交換資料，模擬企業內的實際網絡環境，測試同學間互相配合的能力和發揮群體合作精神，完成實習後還會為您講解一系列的模擬試題，令您能夠掌握考試要點。

3 月31 前報名即刻送你三科考試合格保證，讓你考得更加安心。

適合人仕:

有志投身 I.T. 界的人仕，網絡管理人員，系統工程師

修讀條件:

具有基礎的 Cisco Router 及 Switch 的操作經驗

對互聯網及 TCP/IP 的概念有深入了解

對網絡系統及 LAN、WAN 知識有濃厚與趣

已成功考取 CCNA 證書

課程包括:

導師精心編製 CCNP 2010 課程筆記

Sybex CCNP 以及其他不同科目的電子書

課堂上理論和實習同時進行，每組 5-6 人，一人一 Router 互相連接進行一系列實習

三十多個不同型號的 Router 隨時免費任用，方便同學課餘時間都可以實習

配合 Packet Tracer v5.2 Router Simulator 軟件，提早在家中熟練考試內容

能支援所有 Router commands 的 Dynamips Router Simulator 軟件一套

全新 3 月份更新的模擬試題連參考答案 (模擬試題 "一年" 免費更新保證，考試更有彈性)

課程實習 CD-ROM 一隻

保證一次過合格，否則可免費重考一次

由擁有 CCNP / CCDP / CISSP / CISA 及多年豐富網絡工作經驗之導師任教

課程電腦設備:

我們採用全新 DELL 原廠電腦，配以 Intel Core 2 或 AMD Athlon 64 X2 高速處理器、
2GB DDR2 記憶體、500GB SATA II Hard Disk 及 17" LCD Display，加上每部電腦均連接上 100/1000 Mbps Fast Ethernet 高速網絡，在學習過程中保證 "暢通無阻"。

課程網絡實習設備:

為增強本中心 CCNP 課程的學生質素，我們投放大量資源購買三十多個不同型號的 Router，包括 2600、2800、3640 系列，以及 2900 / 3550 / 5000 Series FastEthernet Gigabit Switch，理論和實習同時進行，讓同學有不明白之時可即時發問，知識更加容易吸收，事半功倍。

Cisco 2600 Series Router

Cisco 2600 Series Router

Inside Cisco 2600 Router

3500/5000 Series Switch

課程實習中你將會學到 ....

伸延 IP 定址 (Extending IP Addresses) 原理

熟練掌握 IPv6 的原理、IPv6 常用的路由協議、IPV4 和 IPv6 的遷移

學習實施多 EIGRP、IS-IS、OSPF 多區域互聯運作

了解 BGP（邊界閘道協議）的原理及操作指令

學習 Multicast 群組傳播網路的運作和設定

學習實施VLAN 間路由及多層交換

學習使用各種高可用性技術，包括: HSRP、VRRP、GLBP 等

掌握語音技術 VoIP 和 QoS (Quality of Service)

了解和懂得配置無線網路安全......等

CCNP 試題分析，解讀考試 Simulation 詳細內容及步驟

課程小組實習:

全班分成多個小組，利用不同設備建立多個網絡，然後使用 Router 互相連接，傳遞資料

運用各種不同的高層次 Routing Protocol (如 EIGRP、OSPF、IS-IS 及 BGP) 等

模擬企業內的網絡環境，測試同學間互相配合的能力和發揮群體合作 "Teamwork" 的精神

授課語言:

以廣東話授課為主，亦會以英語輔助

課程全長:

日間課程: 18 堂 / 72 小時 (每堂 4 小時)

晚間課程: 24 堂 / 72 小時 (每堂 3 小時)

開課日期:

CCNP0327 03 月 27 日 (逢星期六， 2 - 6 p.m) 最後 1 位
CCNP0424 04 月 24 日 (逢星期六， 2 - 6 p.m) 最後 5 位

課程費用:

$ 5,980

3 月31 前報名即刻送你三科考試合格保證，讓你考得更加安心。

匯豐信用卡可享 12 個月免息分期優惠 (每月只須 $ 499)

舊生或舊生介紹可享 95 折 優惠 (請預早致電留位時登記作實)

舊生在報名表上獲導師簽名推薦更可享 9 折 優惠 (有關詳情請向您的導師查詢)

完成本課程後可參加的相關考試:

(642-902) Implementing Cisco IP Routing (ROUTE)
試題數量: 50-60 題 (2-3 題 Simulation)
考試時間: 120 分鐘
合格分數: 790 / 1000 分
模擬試題參考

(642-813) Implementing Cisco IP Switched Networks (SWITCH)
試題數量: 50-60 題 (2-3 題 Simulation)
考試時間: 120 分鐘
合格分數: 804 / 1000 分
模擬試題參考

(642-832) Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
試題數量: 50-60 題 (2-3 題 Simulation)
考試時間: 120 分鐘
合格分數: 790 / 1000 分
模擬試題參考

成功通過考試後獲得的國際認可證書及資格:

Cisco Certified Network Professional (CCNP)

證書有效期: 3 年

(根據 Cisco 規定，CCNP 證書的有效期為 3 年，同學成功考取證書的 3 年後，便需要重考更新證書。有見及此，我們提供免費升級保證，同學當證書到期前 3 個月，可向我們索取最新的 CCNP 筆記及模擬試題，毋須再支付額外的課程費用，便可輕易升級認證，讓您的證書可再延續多三年。)

642-902 ROUTE 課程內容 :

Implement an EIGRP based solution, given a network design and a set of
requirements

Determine network resources needed for implementing EIGRP on a network.
Create an EIGRP implementation plan
Create an EIGRP verification plan.
Configure EIGRP routing.
Verify EIGRP solution was implemented properly using show and debug commands .
Document results of EIGRP implementation and verification.

Implement a multi-area OSPF Network, given a network design and a set of
requirements

Determine network resources needed for implementing OSPF on a network.
Create an OSPF implementation plan.
Create an OSPF verification plan.
Configure OSPF routing.
Verify OSPF solution was implemented properly using show and debug commands.
Document results of OSPF implementation and verification plan.

Implement an eBGP based solution, given a network design and a set of
requirements

Determine network resources needed for implementing eBGP on a network.
Create an eBGP implementation plan.
Create an eBGP verification plan.
Configure eBGP routing.
Verify eBGP solution was implemented properly using show and debug commands .
Document results of eBGP implementation and verification plan.

Implement an IPv6 based solution, given a network design and a set of
requirements

Determine network resources needed for implementing IPv6 on a network.
Create an IPv6 implementation plan.
Create an IPv6 verification plan.
Configure IPv6 routing.
Configure IPv6 interoperation with IPv4.
Verify IPv6 solution was implemented properly using show and debug commands.
Document results of IPv6 implementation and verification plan.

Implement an IPv4 or IPv6 based redistribution solution, given a network
design and a set of requirements

Create a redistribution implementation plan based upon the results of the
redistribution analysis.
Create a redistribution verification plan.
Configure a redistribution solution.
Verify that a redistribution was implemented.
Document results of a redistribution implementation and verification plan.
Identify the differences between implementing an IPv4 and IPv6 redistribution
solution.

Implement Layer 3 Path Control Solution

Create a Layer 3 path control implementation plan based upon the results of the
redistribution analysis.
Create a Layer 3 path control verification plan.
Configure Layer 3 path control.
Verify that a Layer 3 path control was implemented.
Document results of a Layer 3 path control implementation and verification plan.
Implement basic teleworker and branch services.
Describe broadband technologies.
Configure basic broadband connections.
Describe basic VPN technologies.
Configure GRE.
Describe branch access technologies.

642-813 SWITCH 課程內容 :

Implement VLAN based solution, given a network design and a set of
requirements

Determine network resources needed for implementing a VLAN based solution on a
    network.
Create a VLAN based implementation plan.
Create a VLAN based verification plan.
Configure switch-to-switch connectivity for the VLAN based solution.
Configure loop prevention for the VLAN based solution.
Configure Access Ports for the VLAN based solution.
Verify the VLAN based solution was implemented properly using show and debug
    commands .
Document results of VLAN implementation and verification.

Implement a Security Extension of a Layer 2 solution, given a network
design and a set of requirements

Determine network resources needed for implementing a Security solution.
Create a implementation plan for the Security solution.
Create a verification plan for the Security solution.
Configure port security features.
Configure general switch security features.
Configure private VLANs Configure VACL and PACL.
Verify the Security based solution was implemented properly using show and debug
commands.
Document results of Security implementation and verification.

Implement Switch based Layer 3 services, given a network design and a
set of requirements

Determine network resources needed for implementing a Switch based Layer 3
solution.
Create an implementation plan for the Switch based Layer 3 solution.
Create a verification plan for the Switch based Layer 3 solution.
Configure routing interfaces Configure Layer 3 Security.
Verify the Switch based Layer 3 solution was implemented properly using show and
debug commands.
Document results of Switch based Layer 3 implementation and verification.

Prepare infrastructure to support advanced services

Implement a Wireless Extension of a Layer 2 solution.
Implement a VoIP support solution.
Implement video support solution.

Implement High Availability, given a network design and a set of
requirements

Determine network resources needed for implementing High Availability on a
network.
Create a High Availability implementation plan.
Create a High Availability verification plan.
Implement first hop redundancy protocols.
Implement switch supervisor redundancy.
Verify High Availability solution was implemented properly using show and debug
commands.
Document results of High Availability implementation and verification.

642-832 TSHOOT 課程內容 :

Maintain and monitor network performance

Develop a plan to monitor and manage a network.
Perform network monitoring using IOS tools.
Perform routine IOS device maintenance.
Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer.

Troubleshoot Multi Protocol system networks

Troubleshoot EIGRP.
Troubleshoot OSPF.
Troubleshoot eBGP.
Troubleshoot routing redistribution solution.
Troubleshoot a DHCP client and server solution.
Troubleshoot NAT.
Troubleshoot first hop redundancy protocols.
Troubleshoot IPv6 routing.
Troubleshoot IPv6 and IPv4 interoperability.
Troubleshoot switch-to-switch connectivity for the VLAN based solution.
Troubleshoot loop prevention for the VLAN based solution.
Troubleshoot Access Ports for the VLAN based solution.
Troubleshoot private VLANS.
Troubleshoot port security.
Troubleshoot general switch security.
Troubleshoot VACL and PACL.
Troubleshoot switch virtual interfaces (SVIs).
Troubleshoot switch supervisor redundancy.
Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video).
Troubleshoot a VoIP support solution.
Troubleshoot a video support solution.
Troubleshoot Layer 3 Security.
Troubleshoot issues related to ACLs used to secure access to Cisco routers.
Troubleshoot configuration issues related to accessing the AAA server for
authentication purposes.
TTroubleshoot security issues related to IOS services (i.e.,finger, NTP, HTTP,
FTP, RCP etc.).